A large number of water systems workers have suffered serious injuries recently, mostly at the hands of big industrial companies who do not take basic safety precautions. Industries such as the bottled beverage industry, the paper and cardboard industry and the plastic industry regularly have major accidents that put their workers at risk. Although such accidents are regrettable, they should never be allowed to happen. You can view here for some tips to help you avoid waterborne diseases, both for yourself and your coworkers.
Wear protective clothing – The type of protective clothing you wear depends on the job you do, but most likely you will need heavy-duty gloves, eye protection and a hard hat. For example, if you are dealing with high concentrations of acid, you will want to use silicon oil based goggles or eye shields that offer 100% protection against acidic fumes and vapors. Additionally, if you use a pressure washer, you may want to wear a particulate filter to protect yourself against dust particles. Click this link: blairnorris.com to learn about safety for the water systems workers.
Follow safe handling procedures – If you are a water system’s workers, you must always comply with the sanitary standards set by your industry. Prohibited materials and fluids should never enter the system, as they can easily cause serious contamination problems. Do not fill any system with water unless you know that the water is fully clean and uncontaminated. If you suspect that water is contaminated, you should not use it until it has been tested. Furthermore, you should not throw away used water, even if it says “sterile”.
Use chemical-free detergents – The water used in most water systems workers’ jobs is full of chemicals that can be harmful. Therefore, it is absolutely necessary to use chemical-free detergents to disinfect your water system. However, these detergents should be replaced immediately after use. After use, it is imperative that you remove the soap residue from your water system and rinse the pipes with running water. If possible, refer to the manufacturer manual for a reminder on when to replace the detergent.
Keep the pipes clean – The pipes that carry water within a water system’s workplace should be cleaned at least once in every two months. This should be done at the end of a hot water wash or when the system stops generating water. Do not use harsh solvents or abrasive rinses to clean your pipes, as they can cause damage to the internal parts of the system. In addition, if you do this frequently, the pipes may block or corrode.
Observe safety precautions – Every water system’s workers must observe safety measures at all times. This includes not working near or over children or animals. You must also wear protective gear such as gloves, goggles, and masks. Always remember to put these safety items on before entering a work area. It would also help if you had a fire extinguisher at hand. You can read this post to get more information on this subject: https://en.wikipedia.org/wiki/Safety.